Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 2
Registered: ‎11-07-2017

ICON Touch 7 & 4.3 Fuel Warning

Do anyone have a method to turn off the fuel warning alarm on the ICON touch displays.

Maybe change the warning level from 20% to say 10% instead ????

Captain
Posts: 143
Registered: ‎10-21-2015

Re: ICON Touch 7 & 4.3 Fuel Warning

The alarm cannot be disabled or otherwise turned off.  Depending upon the firmware revision in the instrument, you may be able to improve the situation.

 

Early firmware would repeatedly display the pop-up warning when the indicated level reached the limit.  Later firmware update limited the warning to only one time per power on cycle.  It reduces the nuisance of repeated warnings which I suppose is what you are seeking.

Highlighted
Mate
Posts: 2
Registered: ‎11-07-2017

Re: ICON Touch 7 & 4.3 Fuel Warning

is there any way to update the firmware without taking the boat to a dealer?

Captain
Posts: 613
Registered: ‎08-20-2017

Re: ICON Touch 7 & 4.3 Fuel Warning

No, even if one had the EV6 diagnostic software and connecting cables required to perform updates it requires dealer access to download the updates. There are too many emission related and safety related systems on modern outboards that could be calibrated incorrectly by those that are not factory trained technicians.