Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 2
Registered: ‎08-15-2017
Accepted Solution

Missing model number

[ Edited ]

Outboard appears to be a '92 to 98 or '99 Johnson with a 25 " shaft. No longer a model number tag on frame- appears to be eaten away by the elements. The serial number is G3180185 and it has an OIS 2000 ignition system. Casting number on carb is 433656. 

Looking for info so I can get a parts and service manual flor it. 

The cover suggests it is a 175HP. 

Highlighted
Admiral
Posts: 9,039
Registered: ‎07-14-2011

Re: Missing model number

[ Edited ]

 

 

Your motor is a 1993 J175EXET

 

For service manual and literature, click on  www.outboardbooks.com 

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 2
Registered: ‎08-15-2017

Re: Missing model number

Awesome!  Thank you so much. 

Highlighted
Admiral
Posts: 9,039
Registered: ‎07-14-2011

Re: Missing model number

Always glad to help.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.