Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 2
Registered: ‎12-08-2016

Model year

Hi Bluewater Bill,I have just purchased 40hp 2stroke Johnson, the serial and model numbers appear to have been worn off the sticker. I have placed photo's in my public photo's,
Thanks in advance .
Stevek
Highlighted
Admiral
Posts: 9,468
Registered: ‎07-14-2011

Re: Model year

 

 

The motor cover decal is from a 1990 model. Luckily there have not been major changes in the 40 HP series as most parts are common for multiple years.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 2
Registered: ‎12-08-2016

Re: Model year

Thanks for the information Bill