Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 4
Registered: ‎12-11-2011

OMC Triple Guard Grease

I've searched the internet and have been unable to find out if the Triple Guard Grease contains teflon.  My

30HP ETEC is running solely in saltwater which I know the Triple Guard is rated for saltwater but I've heard the

Mercury 2-4-C and the Mercury Special 101 are good as well since they contain teflon.  Can someone please advise?

Thanks!

Admiral
Posts: 8,007
Registered: ‎07-14-2011

Re: OMC Triple Guard Grease

My understanding is that the Mercury 2,4,C now contains Teflon, but have not heard anything about Teflon in Triple Guard or Merc 101. All are good products and have different applications but can be used interchangeably in some applications such as protecting propshaft splines or steering rams.

 

The Triple Guard is saltwater rated, sticks to an object without washing off, and  lubricates well without separating or hardening over time like some other greases do. I've seen water pump bolts and gearcase bolts with Triple Guard on them that still can be removed easily even after 5 years in saltwater.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.