Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Skipper
Posts: 9
Registered: ‎12-23-2011

Oil reserve tank

Have a 1.8 gal. reserve tank on my 2011 115 E-tech and would like to up grade it to a 3 gal. tank.  Have looked through the parts section and can't find the reserve tanks.  Are they available?

Admiral
Posts: 8,007
Registered: ‎07-14-2011

Re: Oil reserve tank

#177302 - 3 gal. oil tank

 

You have to go to the OB Accessories, then to the Fuel/Oil section in the Evinrude Parts area

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Skipper
Posts: 9
Registered: ‎12-23-2011

Re: Oil reserve tank

Thanks, Bill

Skipper
Posts: 9
Registered: ‎12-23-2011

Re: Oil reserve tank

Bill can I use the 3 gal tank only and tranfer the parts from my 1.8 tank?  I was able to bring up the page the way you told me.  Thanks again.

Highlighted
Admiral
Posts: 8,007
Registered: ‎07-14-2011

Re: Oil reserve tank

I think there would be a problem with the oil pickup length as the 3 gal. tank is deeper than the 1.8 gal.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.