Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎02-11-2017

Oil tank reading

My etec remote tank has a wiring harness. can I use this to show me the oil levels on

My oil level gauge?

Highlighted
Admiral
Posts: 8,427
Registered: ‎07-14-2011

Re: Oil tank reading

[ Edited ]

 

 

You did not say what model number E-TEC engine that you have.

 

If yours is a traditional E-TEC, one with 2 or 3 latches on the motor cover and 2 wires coming from the remote oil tank,  it will not tell you the oil level but will alert the driver if the level gets low.

 

You can obtain an accessory oil level kit from your dealer.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.