Operators Guide G2 150 - 200, Installation and Pre Delivery Guide G2 150 - 200 and G2 200 HO - 300

GEB · ‎09-10-2013

Hi Bill,

As title. I’m unable to locate these Evinrude publications as PDF’s and I have searched some and then some more.

If they are available as PDF’s would you please provide a link(s) from where I could download them.

Thank you

GEB

ps I have all the other E-TEC Operators and Installation Guides PDF’s

BluewaterBill · ‎07-14-2011

The latest G2 Pre-delivery and Installation booklet is not available online at this time. Customers can contact their dealer to order one.

"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald

***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.

GEB · ‎09-10-2013

Hi Bill,
Thank you for the prompt reply which saves me further online searching.
Also may I assume that the Operators Guide 150 - 200 G2, per your advice, is likewise only available from my dealer.
Thank you
GEB

BluewaterBill · ‎07-14-2011

Sorry, no online G2 installation manuals of either engine are available for download.

"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald

***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.

GEB · ‎09-10-2013

Hi Bill,

Ok, thank you.

Cheers

GEB

MJAM · ‎10-16-2020

https://mastrodascia.com.br/Content/Documents/evinrude-etec-g2-200-300-installation.pdf

Hope this helps

MJAM · ‎10-16-2020

https://mastrodascia.com.br/Content/Documents/evinrude-etec-g2-200-300-installation.pdf

I hope this helps

Operators Guide G2 150 - 200, Installation and Pre Delivery Guide G2 150 - 200 and G2 200 HO - 300

Re: Operators Guide G2 150 - 200, Installation and Pre Delivery Guide G2 150 - 200 and G2 200 HO - 3

Re: Operators Guide G2 150 - 200, Installation and Pre Delivery Guide G2 150 - 200 and G2 200 HO - 3

Re: Operators Guide G2 150 - 200, Installation and Pre Delivery Guide G2 150 - 200 and G2 200 HO - 3

Re: Operators Guide G2 150 - 200, Installation and Pre Delivery Guide G2 150 - 200 and G2 200 HO - 3

Re: Operators Guide G2 150 - 200, Installation and Pre Delivery Guide G2 150 - 200 and G2 200 HO - 3

Re: Operators Guide G2 150 - 200, Installation and Pre Delivery Guide G2 150 - 200 and G2 200 HO - 3