Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 1
Registered: ‎06-08-2019

Raker RX4 Prop

I have a Raker RX4 prop with Variable Vent Ports. I'm missing one of the adjustable vents and screw on one of my  prop vents. Where can I get a replacement?

Posts: 9,596
Registered: ‎07-14-2011

Re: Raker RX4 Prop


Any Evinrude dealer can order this for you.


RX4 - Variable Vent Port (VVP) disk - service replacement kit
Disk and Screw Kit  (part # 5009914) will service the vent disk used on RX4 propellers. 
The kit contains 1 disk, 1 screw, and an instruction sheet.

Propeller Adjustable-Vent Repair Kit - 5009914




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.