Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 7
Registered: ‎02-24-2013

Tilt & trim

My 200HO will not tilt up when pressing either the switch on the control handle nor the tilt button on the motor.  Tilt down OK.  This was an intermitant problem for two years but now has become more of a problem.  If I hit the up buttons a dozen or more times it will eventually come up.  What shoul I look for?

Posts: 9,217
Registered: ‎07-14-2011

Re: Tilt & trim




Duplicate questions are not needed here and sometimes confuse the issue. Look for our response at your other question location.




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.