Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Captain
Posts: 42
Registered: ‎04-03-2018

Re: Use of XD50 or XD100 differences

Hey

Thank you so i can just refill with Xd 100? btw love this forum!!

Admiral
Posts: 8,441
Registered: ‎07-14-2011

Re: Use of XD50 or XD100 differences


@Osbar_ODl wrote:

Hey

Thank you so i can just refill with Xd 100? btw love this forum!!




 

Fill 'er up with XD-100 and go enjoy your time on the water with your Evinrude.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Skipper
Posts: 11
Registered: ‎05-25-2017

Re: Use of XD50 or XD100 differences

Will xd100 work in cold weather. December and April mornings temp near freezing it takes a longtime to start my g2
Admiral
Posts: 8,441
Registered: ‎07-14-2011

Re: Use of XD50 or XD100 differences


@RatzeSS wrote:
Will xd100 work in cold weather. December and April mornings temp near freezing it takes a longtime to start my g2

In your operator's guide it specifies that Evinrude  XD-100 oil is required in cold weather.

Very often hard starting in cold weather is due to weak or undersized batteries cranking the motor over slower. Also in the operator's guide, there are higher minimum specifications for a battery if the motor is used in freezing weather. Talk to your dealer.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.