Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 1
Registered: ‎10-21-2012
Accepted Solution

hours on motor?

I'm a new Etech owner. 250 hp 2 stroke  gps module; I can't determine how many hours I have on the motor.  Where or how do I select it on the I Command menu?

Highlighted
Admiral
Posts: 8,844
Registered: ‎07-14-2011

Re: hours on motor?

 

 

Page 38 in the owners booklet describes in detail how to set up a digital display page that includes the total engine hours.

 

Select single digital, dual or quad digital to display those options.

1. Press MENU.

Use UP or DOWN buttons to select PAGES.

Press ENTER.

2. Press ENTER to select ADD PAGE

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.