Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 2
Registered: ‎10-11-2019

Re: i.d. serial number without id plate

Hey Bluewater Bill, new here, and like all others, i need help identifing my old 15 hp evenrude. the number on the plug is10835M   next line is E0001712.

 

 

HOPE YOU CAN HELP ME OUT,  Thanks,

 

 

  Jimmy

Admiral
Posts: 8,427
Registered: ‎07-14-2011

Re: i.d. serial number without id plate


@Basnbud wrote:

Hey Bluewater Bill, new here, and like all others, i need help identifing my old 15 hp evenrude. the number on the plug is10835M   next line is E0001712.

 

 

HOPE YOU CAN HELP ME OUT,  Thanks,

 

 

  Jimmy


  A model 10835M is a 1978  9.9 hp Evinrude, not a 15hp

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 2
Registered: ‎10-11-2019

Re: i.d. serial number without id plate

Anyway you could help me out as well, no plate on my motor, was told its a 1990 Johnson J25RES (which is listed as manual start but mine is electric). Stamp on motor says R8565263. Thank you!

Admiral
Posts: 8,427
Registered: ‎07-14-2011

Re: i.d. serial number without id plate

 

8565263 is a 1990 E25TEES

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Mate
Posts: 2
Registered: ‎10-11-2019

Re: i.d. serial number without id plate

Thanks Bill

 

Jimmy

Skipper
Posts: 4
Registered: ‎10-21-2019

Re: i.d. serial number without id plate

I have a 5.5 fisherman by evinrude the only #'s I can find are 30215, 0358332, 204974 i'd like have an aprox year

if possible

Admiral
Posts: 8,427
Registered: ‎07-14-2011

Re: i.d. serial number without id plate

[ Edited ]

 

 

Post pictures of the sides and back of the motor, close up of the motor cover decals, and sides, back and top of the motor with the cover removed.

 

Also look for a silver disk about 1" in diameter on the engine block that may have numbers stamped into it.

 

 

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Skipper
Posts: 4
Registered: ‎10-21-2019

Re: i.d. serial number without id plate

2019-10-22 14.57.28.jpg2019-10-22 14.57.28.jpg2019-10-22 14.57.41.jpg2019-10-22 14.57.46.jpg2019-10-22 14.58.39.jpg2019-10-22 14.58.40 HDR.jpg2019-10-22 14.58.45.jpg2019-10-22 14.58.52.jpg2019-10-22 14.58.56 HDR.jpg2019-10-22 14.59.01-1.jpg

Admiral
Posts: 8,427
Registered: ‎07-14-2011

Re: i.d. serial number without id plate


@Slasher8 wrote:

I have a 5.5 fisherman by evinrude the only #'s I can find are 30215, 0358332, 204974 i'd like have an aprox year

if possible


From your motor cover decals and the images of the engine powerhead, your motor is likely a 1963 Evinrude 5-1/2 hp, model 5302.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Skipper
Posts: 4
Registered: ‎10-21-2019

Re: i.d. serial number without id plate

Thankyou