Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Skipper
Posts: 5
Registered: ‎05-01-2020

Re: i.d. serial number without id plate

Thanks so much Bill! I see you’ve helped a lot in this situation. We all appreciate you
Highlighted
Mate
Posts: 2
Registered: ‎06-08-2020

Re: i.d. serial number without id plate

Need some help determining the year and model of my Evinrude 85 HP motor, lower end bearings went and cracked my gear case. Need to order a new gear case and gear assembly.
Highlighted
Mate
Posts: 2
Registered: ‎06-08-2020

Re: i.d. serial number without id plate

4DFDB84B-0B1F-472A-A4DB-C4E857D5C242.jpegBC94FBC1-B1F4-4E40-ABD0-8C62783A1166.jpeg520BB926-F461-479F-8A68-0BEE98D69A64.jpegBE6E783D-7D45-4614-BB68-16065E82E068.jpeg

Highlighted
Mate
Posts: 3
Registered: ‎06-08-2020

Re: i.d. serial number without id plate

Maybe you can help me out with this
Highlighted
Captain
Posts: 298
Registered: ‎08-11-2011

Re: i.d. serial number without id plate

Looks like a 1980 E85STLCSA. 

Highlighted
Captain
Posts: 298
Registered: ‎08-11-2011

Re: i.d. serial number without id plate

ArkansasJ, What's your question?

Highlighted
Skipper
Posts: 5
Registered: 3 weeks ago

Re: i.d. serial number without id plate

Hey new to the forum, hope someone can help my 15hp evinrude outboard is missing the nameplate the welsh plug in thr top of the casing has a 'm' symbol at the top and then below it has stamped "A0118185" I just need to know the year so I can service it correctly I'm thinking blate 70s or early 80s thanks in advance
Highlighted
Admiral
Posts: 9,225
Registered: ‎07-14-2011

Re: i.d. serial number without id plate

That motor was built in Australia and not the US and we are unable to assist using that number.

 

If you can post both side decals on the motor cover plus the top, both sides, and back of the enigne powerhead, we may be able to narrow it down for you.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Skipper
Posts: 5
Registered: 3 weeks ago

Re: i.d. serial number without id plate

Corect I am in Australia, I'll twke some this afternoon and post them thank you
Highlighted
Skipper
Posts: 5
Registered: 3 weeks ago

Re: i.d. serial number without id plate

IMG_20200627_101444.jpg