i.d. serial number without id plate - Page 24 - E-NATION

Slasher8 · ‎10-21-2019

What's the best gas oil mixture for this outboard

Snel1984 · ‎12-12-2019

Can you help me out???

BluewaterBill · ‎07-14-2011

@Snel1984 wrote:

Can you help me out???

E120TLES 1989 120 hp Evinrude

"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald

***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.

Snel1984 · ‎12-12-2019

Your a wizard...Thank you!

Ahoy · ‎07-30-2019

Any luck Bluewater Bill?

I have the blue Evinrude 50hp outboard motor with no ID plate, non VRO I think its 1990ish...

On the freeze plug I have the numbers A2405492 and the only other number I can find

is stamped on top of the cylinder head 334207.

Can I get anything else that would help? Cheers

BluewaterBill · ‎07-14-2011

Sorry, unable to determine Australian serial numbers built by the former OMC before they were closed down in 2000.

Lucky for you that maintenance parts are pretty interchangeable with various years.

"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald

***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.

Ahoy · ‎07-30-2019

Thanks anyway really appreciate your time.

ncfowler · ‎02-17-2020

I recently purchased what I believe is an Evinrude 40hp although I have no way to prove that due to the fact that the entire exterior of the motor has been painted. I did locate the serial number on the silver plug on the side of the engine and it reads “G3116509” I have spent days on the internet searching for verification on the model year and number before finding this forum. Any help is greatly appreciated!

ncfowler · ‎02-17-2020

ncfowler · ‎02-17-2020

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate

Re: i.d. serial number without id plate