Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 1
Registered: ‎04-10-2016

Pontoon Boat Propeller Selection

Hi There, I have a 22 ft pontoon that I am rigging up with a 200 E-Tec. I mostly will be using it for cruising around the lake at low speeds, and when the grand kids show up skiing. But when I am out fishing and when the bass boats guys come by me I want to have a little fun with them and be able to crank it up and throw a rooster tail like they do - LOL. I know what your think but hey - lets have some fun!

What size and pitch prop would you recommend. I am looking at the "Rebel TBX" or the "Viper" Please advise.


Posts: 8,853
Registered: ‎07-14-2011

Re: Pontoon Boat Propeller Selection






Here is a performance link to a 200 HP on a 22' pontoon boat.




For all around pontoon boat propping, it is best to test props with a light load of fuel and maybe 2 passengers. Try for a prop that gives close to the top rpm range so as to not overload or lug the motor when 10 people are on board and you are pulling skiers or tubers on a hot summer afternoon.




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.