Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 2
Registered: ‎08-06-2020
Accepted Solution

Nameplate missing

Hi all,
I'm Hans (Nautilus) a new member from Holland, Rotterdam.
My Johnson outboard two stroke has no indentification plate, So I hope somebody Can help me out.
There is a number stamped on a aluminium plate, the number is:
G3083555
Howmany horse power is the engine and from what year.
Thanks in advance
Hans (nautilus)
Highlighted
Admiral
Posts: 9,517
Registered: ‎07-14-2011

Re: Nameplate missing

[ Edited ]

@Nautilus wrote:
Hi all,
I'm Hans (Nautilus) a new member from Holland, Rotterdam.
My Johnson outboard two stroke has no indentification plate, So I hope somebody Can help me out.
There is a number stamped on a aluminium plate, the number is:
G3083555
Howmany horse power is the engine and from what year.
Thanks in advance
Hans (nautilus)
#3083555 is a model BJ50BELEN  - 1992  50hp

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 2
Registered: ‎08-06-2020

Re: Nameplate missing

Thanks a lot for your Quick response. Now I know a lot more. 

 

Do you know if I Can use the tail end  a 50 hp joh'son tail from from 1979 Can be used on this engine?

Or

Can I mount the stator from the 1992 engine on the 1979 engine? 

 

Kind regards

 

Hans 

 

Kind regards, 

Hans